Changzhou Dahua-Luckypower
Silicone sprays can be widely used in all areas requiring general lubrication to protect artificial leather, plastics and rubber from harmful ultraviolet rays, high temperatures and ozone; Prevent panels, leather and tires from fading, cracking, wrinkling and aging; Enhance and maintain the original luster of the paint; Eliminate static electricity and dirt residue. dimethyl silicone oil, hydrogen silicone oil, amino silicone oil, Antifoaming Agent, Silicone Products, Release agent, silicone
Polyurethane floor refers to the use of polyurethane floor coatings combined with a new type of solvent-free or water-based, non-polluting ground functional construction technology, which can be made to meet certain specific requirements (high-end conferences or entertainment centers focus on comfort requirements; industrial and mining enterprises pay attention to corrosion And wear resistance requirements; the food industry pays attention to the high and low temperature resistance, the...
Pemano wrote "People's interest in two-dimensional materials, I am afraid that no one can be compared with the two-dimensional version of silicon - "silicon". Silicon is attractive for 50 years, the silicon material carrying the flourishing development of computer technology The performance of graphene, which is a two-dimensional version of carbon with similar properties on the periodic table of the elements, is so magical that it is enough for scientists to hurry and try. Silyene is different...
Introduction Waterborne polyurethane is a new polyurethane system that uses water instead of organic solvents as a dispersion medium. It can be widely used in coatings, adhesives, leather finishing agents, and fabric finishing agents [1], due to its advantages of being non-toxic, inexpensive, safe, and non-flammable. With the continuous improvement of its own performance, it shows great market prospects and has the tendency to gradually replace solvent-based products [2]. The synthesis of...
We has recently developed FIN environmentally-friendly silicone resin coatings and has been put on the market. This product is a new type of environmental protection coating made from phenylchlorosilane, methylchlorosilane and special organic silicon monomers and polyester, and then formulated with propylene glycol, methyl ether, acetic acid, etc. It has strong adhesion, hardness and fullness. Well, it is not easy to crack, blister, and fall off during use. Its solid content is 60% to 80%,...
On September 14th, commissioned by the "Organization of Silicon and Agriculture" International Organization Committee, sponsored by the Chinese Academy of Agricultural Sciences, the Institute of Agricultural Resources and Regional Planning of the Chinese Academy of Agricultural Sciences, the Chinese Society of Plant Nutrition and Fertilizer, and the Leading Biological Agriculture Co., Ltd. jointly organized the project. The 5th "silicon and agriculture" international conference was held in...
Lifting the plastering materials on the walls of buildings, people always think of traditional cement mortar. However, a new type of plastering material has emerged at the moment. This is plastering plaster. Gypsum plaster is a blend of dry plaster and a small amount of high-quality admixture. Compared with ordinary cement mortar, plaster plaster features: First, strong adhesion, not easy to fall off, to overcome the traditional hollow mortar, cracking phenomenon often occurs; the second is a...
According to media reports, Xindaxin Materials plans to invest in a new 3.6 million-kilometer-cut resin diamond line project with a total investment of 460 million yuan, of which over-raised funds will be invested in 91.48 million yuan. At the same time, for the implementation of the project, the company plans to purchase resin diamond wire production equipment and technology from Japan, the transaction amount is 2.7 billion yen (about RMB 210 million). The designed capacity of the proposed...
Although the power provided by photovoltaic modules does not harm the environment and climate, solar power is very expensive. Therefore, it is imperative to increase the module life as much as possible, such as 25 years or more. To achieve this goal, Fraunhofer scholars in the United States are studying solar cell materials that are protected from the environment. Researchers are testing the quality of silicone-wrapped solar modules Sometimes, just a few cents can determine the success or...
According to a latest news, China University of Science and Technology revealed the catalytic activity and microscopic reaction mechanism of titanium dioxide (commonly known as "titanium dioxide") in an anatase structure, and it is expected to find applications in the preparation of organic solar cells and the conversion of solar energy into environmentally friendly chemical energy. The use of titanium dioxide for high-end applications is not alone. Overseas media even pointed out that:...
According to the Ministry of Science and Technology, physical vapor deposition (PVD) is one of the key processes in the production of semiconductor chips and TFT-LCDs. Sputtering metal targets for PVD are more important in the production of semiconductor chips and TFT-LCD manufacturing processes. One of the raw materials, the larger amount of sputtered metal target is ultra-high purity aluminum and ultra-high purity aluminum alloy targets. It can be seen that the key technologies for the...
China Materials Conference 2022-2023 opened in Shenzhen International Convention and Exhibition Center, new materials industry is Guangdong's advantage industry. In 2021, the output value of Guangdong's new materials industry is 2.7 trillion yuan, ranking first in the country. Shenzhen insists on grasping new materials as the focus of the "20+8" strategic emerging industrial cluster and future industries, accelerating the construction of new materials technology innovation and application...
Introduction: Silicone inks are colorants that are specially used for the coloration of silica gel. Due to the extremely special cross-linking treatment, this colorant is suitable for the coloration of almost all silicones. Silicone products such as silicone wristbands, silicone keys, silicone cables, etc. have strong adhesion and wear resistance, surpassing similar imported products. Ink chromatography is generally black, white, red, yellow, blue, green, purple, orange, fluorescent,...
September 10, 2009 - Shin-Etsu Chemical Co., Ltd. (Head Office: Tokyo, President Chihiro Kanagawa) announced that it has developed new silicone products used for high brightness LEDs. The new SWC Series is advanced silicone reflectors designed to greatly improve The brightness performance of LEDs. The new LPS-AF Series is protective film materials that are transparent and possess high heat resistance. These new materials will be used to improve the performance of high-brightness LEDs that are...
The new materials industry is focused on a "new" word. Because of its "new", it has great development potential and considerable development prospects. At present, the new material industry structure of our province has been gradually optimized and upgraded, and the scale of the industry has been continuously expanded. The innovation platform based on universities, scientific research institutions and enterprise R&D institutions has taken initial shape. The main position of independent...
Wacker Chemie AG recently introduced a UV-activated silicone elastomer material POWERSIL UV that is suitable for medium and high voltage insulation technology. According to reports, the cross-linking process of UV-activated silicone materials is initiated by ultraviolet irradiation compared to conventional silicone elastomers that are cross-linked by heating and then automatically hardened at room temperature. Wacker's UV cross-linking technology has two significant advantages: First, the...
In recent years, the world is facing the problem of the increasing scarcity of traditional fuel energy and the increasing harm to the environment. Seeking new energy sources, reducing pollution, and changing the human energy structure have become common goals of all countries in the world. The photovoltaic industry is a common concern for governments as a new non-polluting energy source. Therefore, in order to maintain long-term sustainable development, governments have continuously introduced...
1. Function introduction Double-group silicone thermal conduction potting material is a kind of thermal insulation material, which requires no heat release, no corrosion and low shrinkage when it is cured. It is suitable for various heat conduction sealing and pouring of electronic components and forms thermal insulation system. 2. Material introduction of the silicone rubber raw material The main features of the silicone material are as follows: 1) Curing at room temperature, heating quickly,...
Silicone, an important component of new silicone material, did not achieve the imaginary “good start” in the first year of the “Twelfth Five-Year Plan”, but it was deeply sinister in the overcapacity of the industry. The reporter learned a few days ago that last year China's organic silicon methyl monomer production capacity was in an oversupply situation, among which two methyl monomer plants have been discontinued and there are signs of industrial integration. Responsible person of China...
The product has a semi-gloss surface, long-lasting durability, and an excellent feel. Midland, Michigan, USA-As a leading supplier of innovative silicone solutions for the textile industry, Dow Corning Corporation has introduced a new type of silicone printing silicone for manual screen printing. Dow Corning's Silastic® LCF 9601 textile printing silicone provides a semi-gloss surface, good ductility, excellent color fastness, and soft, non-sticky feel, providing opportunities for apparel...
On October 20th, the 3rd World Plastics Council was held in Yuyao, Zhejiang Province. The heads of the World Plastics Council, the plastics industry associations from all over the world, and representatives from more than 300 domestic companies attended the conference. Hot issues such as plastic innovation applications and sustainability are discussed. Experts pointed out that synthetic resin as a new material will become the new darling of the future plastics. The World Plastics Council (WPC)...
In the 21st century, where the global energy shortage and the environment are worrying, LED has achieved unprecedented opportunities in the field of lighting because of its energy-saving and environmentally friendly characteristics. A Light Emitting Diode (LED) is a semiconductor light-emitting device that converts electrical energy into light energy and is a solid-state light source. Compared with traditional incandescent lamps, LED light sources have unparalleled advantages such as high...
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.